The fabric sum on a costing sheet is tidy: metres a garment, times the price, times the order.
But the mill does not sell metres a garment. It sells rolls, and the roll arrives before the
cutting starts. Both of those cost something, and the cost lands hardest on the small order.
Two things the sheet leaves out
- Rounding up to whole rolls. If the order needs 55 metres and rolls are 50,
you buy two rolls. You pay for 100 and use 55.
- Waiting. The cloth is paid for, and sits, until the order is cut. That is
money tied up, the same arithmetic as in the
payment terms article.
A worked example
These figures are made up to show the sum. They are not a benchmark and not a claim about any
mill. The fabric need is from the
fabric consumption article: 0.918 m a
garment at ₹250 a metre, ₹229.50 a garment. The roll length, 50 m, is an
assumption, and so is the interest rate, 12% a year.
Rounding up to rolls
- 50 garments: 45.9 m needed. One roll, 50 m. Bought ₹12,500, which
is ₹250.00 a garment, ₹20.50 more than the sheet said.
- 60 garments: 55.1 m needed. Two rolls, 100 m. Bought ₹25,000, which
is ₹416.67 a garment — ₹187.17, or 82%, more, because the
fifty-first metre forced a whole second roll.
- 200 garments: 183.6 m needed. Four rolls, 200 m. Bought ₹50,000,
₹250.00 a garment.
- 1,000 garments: 918 m needed. Nineteen rolls, 950 m. Bought
₹237,500, ₹237.50 a garment, ₹8.00 more.
The sheet says ₹229.50 for all four. The bill says ₹237.50 to ₹416.67. The
rounding is a few per cent on a large order and can be most of the fabric cost again on a small
one, depending on where the order falls against a roll.
Round up before you quote
Work out the rolls the order needs, not the metres, and divide the bill by the garments. The
difference between the two is the part of the price nobody saw.
What happens to the leftover
On the 200-garment order, 16.4 m is left over: ₹4,100, 8.2% of the bill. On the
60-garment order, 44.9 m: ₹11,230. If the same fabric is needed again, that cloth is
not wasted, it is stock. If it is not, it is cost. The honest question is whether there is
a next order for that cloth that you can name; the
trims article asks the same of labels.
- Ask the mill for a cut length. Some will cut a part-roll, at a price. If
the price for 55 m is less than the price for a second roll, it is worth it.
- Combine orders in the same cloth. Two orders of 30 garments in one fabric
use one roll; apart, they use two.
- Move the order to a roll boundary, if the buyer has room. A few more
garments may cost nothing in cloth: 50 m covers 54 garments, not 50.
What idle cloth costs
On top of the rounding, the cloth is paid for before it is used. For the 1,000-garment order,
the bill is ₹237,500. If it arrives 30 days before cutting, the interest is
237,500 × 0.12 × 30 ÷ 365 = ₹2,342, or
₹2.34 a garment. For the 200-garment order, ₹493, or
₹2.47 a garment.
It is small beside the rounding, but it grows with the days. Cloth that sits for ninety days
costs three times as much, and cloth that sits until the next season costs the interest and
the risk that the next order never comes.
What the sums leave out
- Made-up roll length, price and rate. 50 m, ₹250 and 12% are
assumptions. Rolls differ by fabric and by mill. Use your own.
- Shrinkage. The metres needed are for cut sizes, not finished ones. The
shrinkage article shows how that can change
the count.
- Defects in the roll. A length of bad cloth is a length you cannot cut. It
adds to the metres bought and comes off the metres usable.
- Minimum quantities per colour. A mill's minimum can be larger than a
roll. Check it before assuming a roll is the smallest purchase, and see the
minimum order article.
Put the rolls you will really buy into the fabric consumption
calculator's price, not the metres, and the costing sheet will carry the figure the
bill does.